PREHER-TECH

Component Level Electronics Repair

Home
Contact Us
About Us
Electronics Repair
Electronics Certification
Computer Certification
CETG Certification
CETG Apprentice
CETG Journeyman
CETG Master Technician
Tools And Tips
LCD TV Repair Guide
Video Game Console Repair
LCD Repair Case Histories
The ESR Meter
DLP & LCD Lamps
ESR Micro
News Letter Subscription
Project Page
News And Weather
History of the television
HDTV
The Cathode Ray Tube
LCD Technology
Plasma Display Technology
DLP Technology
LCOS Technology
The ipod
The Personal Computer
Parts Store
                       Liquid Crystal On Silicon 
                                                    

 

              Below are some great TV repair sites, click on the pictures below to read more.

 

                                             

                            

 

 

Liquid crystal on silicon (LCOS or LCoS) is a "micro-projection" or "micro-display" technology typically applied in projection televisions. It is a reflective technology similar to DLP projectors; however, it uses liquid crystals instead of individual mirrors. This is contrary to LCD projectors which use a transmissive approach. In LCoS, liquid crystals are applied directly to the surface of a silicon chip coated with an aluminized layer, with some type of passivation layer, which is highly reflective.

LCOS technology can produce much higher resolution images using highly advanced silicon technology than liquid crystal display and plasma display technologies, which makes it less expensive to implement in such devices as televisions.
At the 2004 CES, Intel announced plans for the large scale production of inexpensive LCoS chips for use in flat panel displays. These plans were cancelled in October 2004 . Sony has made it to market (December 2005) with the Sony-VPL-VW100 or Ruby projector, using SXRD, 3 LCoS chips each with a native resolution of 1080p (1920 X 1080), with a stated contrast ratio of 15,000 using a dynamic lens. Before this LCoS has been used in standard sets 50" and above (November 2005).
LCoS technology has the potential to enable the manufacture of big-screen (50" and larger) high-definition televisions with very high picture quality at relatively low cost. LCoS, while conceptually straightforward, can be a difficult technology to master; a number of companies have dropped out of the LCoS business in recent years. Nonetheless, as of June 2006, proprietary methods for mass-producing LCoS developed, and at least three manufacturers now produce LCoS-based rear-projection televisions for the consumer market.
Commercial implementations of LCoS technology include Sony's SXRD (Silicon X-tal Reflective Display), Syntax-Brillian's Gen II LCoS, and JVC's D-ILA (Digital Direct Drive Image Light Amplifier). All three of these companies produce and market rear-projection televisions that use three-panel LCoS technology. Sony and JVC also produce and market front-projection displays that use three LCoS panels. Another provider of third-party LCOS chips is a Novato-based firm, Spatialight. Direct-view LCoS devices such as the single-panel LED-illuminated devices made by Displaytech  are also used as electronic viewfinders for digital cameras. These devices are made using ferroelectric liquid crystals, which are inherently faster than other types of liquid crystals.
 

Display system architectures
There are two broad categories of LCOS displays: three-panel and single-panel. In three-panel designs, there is one display chip per color, and the images are combined optically. In single-panel designs, one display chip shows the red, green, and blue components in succession. As each color is presented, a color wheel (or an RGB LED array) illuminates the display with only red, green or blue light. If the frequency of the color fields is lower than about 540 Hz, an effect called color breakup is seen, where false colors are briefly perceived when either the image or the observer's eye is in motion. While less expensive, single-panel projectors require higher-speed display elements to process all three colors during a single frame time, and the need to avoid color breakup makes further demands on the speed of the display technology      
 
                   
                                           

Three-panel designs
In a DLP device the light is separated into three components and then combined back: Two beam splitters are needed. In LCoS devices the light is additionally polarized and then analyzed; four beam splitters are needed.
 
 
                                          
 
 
One-panel designs
There were three single-panel LCoS displays in production. One by Philips, one by Microdisplay Corporation and one from Forth Dimension Displays. Forth Dimension Displays have a Ferroelectric LCoS display technology (known as TDI) (available in SXGA and 720P resolutions) which is mainly, but not exclusively, used in high resolution NTE applications such as Training & Simulation.
 
 
                                                                                                                  

 

                                                                          

 
 
 
                                                              

                                                  Consumer Electronics Technicians Group

 

 

                                            

 

 

                               

                                                              

 
 
 
                                                                 Information and pictures gathered from the Wikipedia and other sources.